Submitted by Alex Ynema (not verified) on July 13, 2008 - 9:42am.
Just tried setting this up on mythbuntu 8.04 and after a bit of fiddling found this was quite easy to setup.
Here's my Steps
1. Download and extract the remote.tar.gz into /var/www/
2. move remote.py into /usr/bin/cgi-bin/
3. should work fine from http://localhost/remote/
4. if not working check that you've enabled the telnet remote port in mythtv front end settings (Setup>General>General Page. Tick the Enable Network Remote Control Interface) and restart Mythfrontend.
Setup on Mythbuntu
Just tried setting this up on mythbuntu 8.04 and after a bit of fiddling found this was quite easy to setup.
Here's my Steps
1. Download and extract the remote.tar.gz into /var/www/
2. move remote.py into /usr/bin/cgi-bin/
3. should work fine from http://localhost/remote/
4. if not working check that you've enabled the telnet remote port in mythtv front end settings (Setup>General>General Page. Tick the Enable Network Remote Control Interface) and restart Mythfrontend.
Should be working fine from there
(Adjust the locations accordingly for your setup)